Add: No. 19, Yongxing Road, Guangxi-ASEAN Economic & Technological Development Zone
The all-stainless steel sandwich pot uses heat-conducting oil as the heat source, has the advantages of large heating area, high thermal efficiency, fast material heating, uniform heating easy control of heating temperature.
Pharmaceutical machinery manufacturers, all stainless steel sandwich pots are widely used in food processing such as candy, pharmacy, dairy, wine, cakes, beverages, candied fruits, canned food, etc. The equipment has beautiful appearance, reasonable design, compact structure, convenient installation, simple operation, flexible use , Safe reliable, easy to maintain so on.
Installation commissioning of all stainless steel sandwich pot
1. When unpacking, check whether the products, accessories packing list are consistent. During transportation, the products parts are damaged. If there is any loss damage, please contact the company to solve it in time.
2. The performance test has been performed before the product leaves the factory. The relative positions of all components have been installed adjusted. Users usually only perform inspections must disassemble at will, so as to avoid improper reinstallation adjustment, which will affect the performance of the product.
3. This equipment does need to be fixed, as long as it is placed on a flat concrete floor.
4. The power supply should meet the requirements of the stirring structure of the equipment, the equipment casing must be well grounded to avoid leakage accidents.
5. During installation, care should be taken to ensure that the oil inlet pipeline is unobstructed, there must be no obstruction.
Food machinery manufacturers, all stainless steel sandwich pot use precautions:
1. Do use coal stove, liquefied gas, etc. in the room the CH4 heating jacket is installed.
2. Do put flammable items around the CH4 heating jacket.
3. If you find any air leakage abnormality, close the valve quickly open the doors windows for ventilation.
4. Remember to turn off when people leave;
5. Check whether the gas supply valve the switch in front of the stove are closed before the break.
6. Fuels such as liquefied petroleum gas pipeline gas should be used, oil is prohibited;
7. The hose connecting the stove should be tightened with the stove end the valve end, it should hang down naturally under the stove surface, maintain a distance of more than 10 cm
8. The place the gas is used must be spacious well ventilated;
9. Someone should take care of the gas used in the CH4 heating jacket.
Add: No. 19, Yongxing Road, Guangxi-ASEAN
Economic & Technological Development Zone